Cf/C复合材料与纯铜的胶接辅助钎焊连接

采用胶接辅助钎焊方法,以TiH_2粉为活性元素源,环氧树脂为粘性载体,Ag-Cu共晶合金为钎料,Cu箔为应力缓冲层材料,实现了C_f/C复合材料与纯铜的钎焊连接,结果表明,接头界面处产生TiC,TiCu,Ag(s,s),Cu(s,s)等反应产物,其结构可表示为(C_f/C)/TiC+Ag(s,s)+Cu(s,s)+TiCu/Cu。通过钎焊工艺试验得出,在930℃保温25 min钎焊条件下接头的抗剪强度达到最大值30 MPa。     

乌鲁木齐机场多普勒天气雷达故障统计分析

文章针对乌鲁木齐机场多普勒天气雷达(以下简称ADWR)2009~2019年发生的故障次数、故障分布以及备件更换情况,逐年统计故障率,深入分析了ADWR系统性能,总结出运行维护中的经验,就如何更好地提高雷达业务运行指标提出建议,以提高ADWR雷达的维护、维修能力,建立有针对性的备件管理,为科学的业务运行管理提供依据。     

起重机自重应力对安全评估中应力测试实验结果的影响

应力测试是起重机安全评估中必须进行的一项检测。目前在安全评估工作中常采用应变电测法来采集起重机工作过程中的应力时程数据,由于该方法只能采集到结构由于载荷变化产生的应力,而无法采集到结构因自重产生的应力,导致应力测试无法获取结构的完整应力。利用起重机金属结构自重应力在总应力中占有的权重,分析其对应力测试实验结果的影响大小,试验结果表明在危险截面自重应力大小占总应力大小可达60%,此时不考虑自重应力进行结构安全性的判定是不全面的。可考虑利用仿真技术获取自重应力[1,2],从而使得安全评估应力测试实验结论更加准确。     

Preparation and properties of Eu and Dy co-doped strontium aluminate long afterglow nanomaterials

The long afterglow nanomaterials of strontium aluminate co-doped by Eu and Dy have been synthesized by co-precipitation combined hydrothermal method. The effects of hydrothermal time, calcination time, pH value, the amount of aluminum nitrate, activator, co-activator and flux H₃BO₃ on the fluorescence properties of the product were investigated by means of single factor optimization experiment. Then the orthogonal experiment was employed to obtain the optimal synthesis conditions that are as follows: n_Dy/n_Eu = 2.5, t_c = 2.5?h, n_Eu/n_Sr = 0.02, t_h = 8?h. Subsequently, the optimal synthesis conditions were verified by three repeated experiments, and the obtained products were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and fluorescence spectrometer. The results showed that the synthesized target products all were the mixed crystal phase of SrAl₂O₄ and Sr₄Al_l4O₂₅. The particles presented regular spherical-like with size ~ 100?nm. The dopants Eu and Dy were confirmed existed in the SrAl₂O₄ powders. The fluorescence and afterglow data of the target products were better than that in the orthogonal experiment scheme. The primary emission spectra band was in the range of 400–600?nm with characteristic peak located at ~ 460?nm corresponding to the transitions of Eu²⁺ ions from 4f⁶5d→4f⁷, and the blue light can be observed by naked eyes. The similar fast-decaying and slow-decaying processes were displayed in all the afterglow curves, and the initial afterglow brightness of the target product is apparently higher than that of products synthesized by the orthogonal experiment. The synthesized target products, which show excellent long afterglow performance, present a great application prospects in the aspects of ceramics, plastics, arts and crafts, ink and coating.     

浅谈液压夹具在转向油缸铸造缸盖加工上的应用

随着液压夹具在机械加工中运用推广,该公司引用液压夹具多年来取得一定成效,文章针对转向油缸的铸造缸盖铣、钻序前后加工工装进行对比分析,重点突出应用全自动液压夹具后可提升装夹效率、加工质量以及降低劳动强度等,可以在不添置设备的情况下,满足产能提升的需求。     

河南某赤褐铁矿石选矿工艺比较试验

河南某难选赤褐铁矿石铁品位达4038%，主要脉石成分SiO2含量为1563%，有害元素硫、磷含量均不高；矿石中的铁主要是赤褐铁，其次是硅酸铁、硫化铁，磁性铁含量很低。为探索该矿石可能的开发利用工艺，进行了多种选矿工艺研究。结果表明：直接正浮选、直接反浮选、焙烧—弱磁选工艺均不能有效提高精矿铁品位；矿石采用焙烧—磨矿—弱磁选工艺处理，在矿样与焦炭粒度均为-2 mm，质量比为100∶4，800 ℃焙烧60 min，焙砂磨选细度为-0074 mm占90%，弱磁选磁场强度为4538 kA/m的情况下，可获得铁品位为5584%、回收率为8922%的铁精矿；该精矿经再磨—弱磁精选，在再磨细度为-0074 mm为98%，弱磁精选磁场强度为3404 kA/m的情况下，可获得铁品位为5637%、回收率为8893%的铁精矿。     

不同改良措施对排土场土壤微形态影响的试验研究

以铁矿排土场废石土为研究对象,自制模型试验装置,设计4种基质改良方法,开展SEM检测实验,并应用IPP软件对SEM照片进行定量化分析,研究在不同改良措施下对铁矿排土场土壤微结构的影响。结果表明：单施3%有机肥土壤孔隙度为16%,与对照组排土场原矿土相比增加了60%。复合施用3%有机肥、掺拌30%的黄土的处理孔隙度达到最大33%。单施3%有机肥、5%有机肥对土壤大团聚体含量皆有显著的促进作用,复合施有机肥、掺拌黄土的处理与单施有机肥的处理对比,土壤大团聚体含量增加并不显著。各改良措施的MWD与FMD均随着土壤中大团聚体的含量增加而增加。     

Allosteric p97 Inhibitors Can Overcome Resistance to ATP-Competitive p97 Inhibitors for Potential Anticancer Therapy

Abstract : A major challenge of targeted cancer therapy is the selection for drug-resistant mutations in tumor cells leading to loss of treatment effectiveness. p97/VCP is central regulator of protein homeostasis and a promising anticancer target because of its vital role in cell growth and survival. One ATP-competitive p97 inhibitor, CB-5083, has entered clinical trials. Selective pressure on HCT116 cells dosed with CB-5083 identified five different resistant mutants. Identification of p97 inhibitors with different mechanisms of action would offer the potential to overcome this class of resistance mutations. Our results demonstrate that two CB-5083 resistant p97 mutants, N660 K and T688 A, were also resistant to several other ATP-competitive p97 inhibitors, whereas inhibition by two allosteric p97 inhibitors NMS-873 and UPCDC-30245 were unaffected by these mutations. We also established a CB-5083 resistant cell line that harbors a new p97 double mutation (D649 A/T688 A). While CB-5083, NMS-873, and UPCDC-30245 all effectively inhibited proliferation of the parental HCT116 cell line, NMS-873 and UPCDC-30245 were 30-fold more potent in inhibiting the CB-5083 resistant D649 A/T688 A double mutant than CB-5083. Our results suggest that allosteric p97 inhibitors are promising alternatives when resistance to ATP-competitive p97 inhibitors arises during anticancer treatment.     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.     

超双疏含氟聚合物的研究进展

超双疏功能性材料在当代化工材料中有着重要的地位，其独特的界面性能使得其在各个领域的应用中大显身手。本文介绍了近年来国内外对含氟聚合物在超双疏领域的研究近况，包括超双疏含氟聚合物的结构特点和合成方法等。含氟聚合物的表面拥有超低的表面能和独特的空间排列方式，通过对比不同结构的含氟聚合物分子与其性能的关系以及对各类含氟聚合物合成方法的调研，发现含氟聚合物作为超双疏涂层材料的使用十分广泛，其结构中含氟单体主要为氟取代丙烯酸酯类，合成方法多为乳液聚合。超疏水含氟聚合物与纳米颗粒材料的结合是当今研究的热点，文中列举了大量研究实例，希望其中的研究方法和合成路线等能对今后该领域的研究起到一定的借鉴作用。